ADG5433WBRUZ Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. There are 16 pins injected into the electronic part body. Multiplexers built on a SPDT switching circuit are built. ADG5433 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 14Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Multiplexers should not be powered above 40V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 9V should be the lowest voltage fed to the electronic component. Put voltage above 55μA on the multiplexer to cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. With dual power supplies, you should attach at least 9V. The electrical component supports 3 inputs. In 140MHz-bandwidths, data can be transferred. There are 6 outputs on the analogue multiplexer. The Automotive series contains it.
ADG5433WBRUZ Features
Switch Circuit: SPDT
Bandwidth: 140MHz
ADG5433WBRUZ Applications
There are a lot of Analog Devices Inc. ADG5433WBRUZ Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- Intelligent PBX
- PBX interfaces
- Ultrasound
- Avionics test equipment
- Multiplexers
- Avionics and Military Systems
- FTTH
- Power routing
- Channel Banks
