Name: ADG5412BRUZ
Brand: Hotenda
SKU: ADG5412BRUZ
Price: 6.41000 USD
Availability: InStock

new-10%

ADG5412BRUZ

Manufacturer part number:ADG5412BRUZ

Manufacturer:Hotenda

Description:187ns, 138ns SPST - NO 10Ohm Analog Switches BREAK-BEFORE-MAKE ADG5412 16 Pins 250pA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG5412BRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	10Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1mW
Technology	CMOS
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG5412
Output	SEPARATE OUTPUT
Pin Count	16
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Power Dissipation	1mW
Max Supply Current	55μA
Turn On Delay Time	202 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	78 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	17pF 17pF
On-state Resistance Match-Nom	0.35Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	187ns, 138ns
Insertion Loss (dB)	-0.6 dB
Charge Injection	310pC
Channel-to-Channel Matching (ΔRon)	350m Ω
Crosstalk	-70dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	262ns
Switch-off Time-Max	182ns
Drain to Source Resistance	10Ohm
Normal Position	NO
Height	1.2mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5412BRUZ Product Details

ADG5412BRUZ Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Look for analog switch ic variants by searching with ADG5412. A 10Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 9V as the lowest voltage for the electrical part. A voltage higher than 55μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 22VFor dual power supplies, a voltage of at least 9V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Among the inputs that can be operated are the 4 inputs. It is possible to transfer data over a 160MHz-bandwidth. There is 10Ohm Drain to Source resistance on this electronic part.