Name: ADG5212BRUZ
Brand: Hotenda
SKU: ADG5212BRUZ
Price: 6.41000 USD
Availability: InStock

new-10%

ADG5212BRUZ

Manufacturer part number:ADG5212BRUZ

Manufacturer:Hotenda

Description:195ns, 165ns SPST - NO 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5212 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG5212BRUZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	160Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Base Part Number	ADG5212
Output	SEPARATE OUTPUT
Pin Count	16
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Max Supply Current	55μA
Turn On Delay Time	210 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	435MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	170 ns
Max Dual Supply Voltage	22V
-3db Bandwidth	460MHz
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.8pF 4.8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	195ns, 165ns
Insertion Loss (dB)	-6.8 dB
Charge Injection	-0.5pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-105dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	290ns
Drain to Source Resistance	160Ohm
Normal Position	NO
Height	1.05mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5212BRUZ Product Details

ADG5212BRUZ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C TA. There are 16 terminations totally. A 1 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. These analog multiplexers are built based on SPST - NO switching circuits. Search with ADG5212 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 160Ohm. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 40V. Dual, Single supply type digital switch with a low cost. There should be 9V voltage fed to the electrical part below 9V. When the digital multiplexer is charged above 55μA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. If you are using dual power supplies, you should attach at least 9V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electrical component supports 4 inputs. The data can be transferred over a wide range of bandwidths, called 435MHz bandwidths. There is 160Ohm resistance between Drain and Source for this electronic part.