Name: ADG513BRZ-REEL
Brand: Hotenda
SKU: ADG513BRZ-REEL
Price: 6.31000 USD
Availability: InStock

new-10%

ADG513BRZ-REEL

Manufacturer part number:ADG513BRZ-REEL

Manufacturer:Hotenda

Description:200ns, 120ns (Typ) SPST - NO/NC 30Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG513 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG513BRZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	30Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG513
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	100pA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	375 ns
Voltage - Supply, Single/Dual (±)	3V~5.5V ±4.5V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	30Ohm Typ
Min Dual Supply Voltage	4.5V
High Level Output Current	30mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	200ns, 120ns (Typ)
Charge Injection	11pC
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG513BRZ-REEL Product Details

ADG513BRZ-REEL Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. It is part of the design of the 16 series that this electronic component is included. The analog switch ics are built using SPST - NO/NC switching circuits. ADG513 can be used to search for analog multiplexer variants. A 30Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 100pA current. The analogue multiplexer may be damaged if voltage is greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 5.5VWhen using dual power supplies, you should attach at least 4.5V. Operating voltages of 5V are compatible with the electrical part.