Name: ADG511BRZ-REEL
Brand: Hotenda
SKU: ADG511BRZ-REEL
Price: 5.61000 USD
Availability: InStock

new-10%

ADG511BRZ-REEL

Manufacturer part number:ADG511BRZ-REEL

Manufacturer:Hotenda

Description:200ns, 120ns (Typ) SPST - NC 30Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG511 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG511BRZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	30Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG511
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	100pA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	375 ns
Voltage - Supply, Single/Dual (±)	3V~5.5V ±4.5V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	30Ohm Typ
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	200ns, 120ns (Typ)
Charge Injection	11pC
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG511BRZ-REEL Product Details

ADG511BRZ-REEL Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. A 4 channel electronic part produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Try searching for the analog switch ic with ADG511 if you are looking for variants. There is 30Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. 4.5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 100pA current would be sufficient. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There is no problem with using dual supply voltage, but it should not exceed 5.5V. You should attach at least 4.5V voltage if you are using dual power supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.