ADG511BNZ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Using the ADG511 search parameter, you can discover variants of the switch. It has an internal resistance of 30Ohm. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. A low voltage of 4.5V should be applied to the electronic component. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5.5V. It is recommended that you attach at least 4.5V to your dual power supply. 5V operating voltages can be used with this electrical part.
ADG511BNZ Features
4 Channels
Switch Circuit: SPST - NC
ADG511BNZ Applications
There are a lot of Analog Devices Inc. ADG511BNZ Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Ultrasound
- Channel Banks
- Imaging
- Video signal routing
- 65 V DACs
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Low-Voltage
- Switching Systems
- DVD-R
