Name: ADG508AKPZ
Brand: Hotenda
SKU: ADG508AKPZ
Price: 11.18000 USD
Availability: InStock

new

ADG508AKPZ

Manufacturer part number:ADG508AKPZ

Manufacturer:Hotenda

Description:300ns, 300ns 300Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG508 20 Pins 1nA 15V 20-LCC (J-Lead)

Case Package:SOT-23

Datasheet:ADG508AKPZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	300Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	ADG508
Pin Count	20
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	1.5mA
Power Dissipation	27mW
Throw Configuration	DPST
Propagation Delay	300 ns
Turn On Delay Time	600 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	600 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	300Ohm
Min Dual Supply Voltage	10.8V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 22pF
On-state Resistance Match-Nom	22.5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	15 Ω
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	450Ohm
Signal Current-Max	0.02A
Height	3.68mm
Length	9.04mm
Width	9.04mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG508AKPZ Product Details

ADG508AKPZ Overview

Shipping overseas is convenient due to the electrical component's packing in 20-LCC (J-Lead). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 20 terminations. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 20 pins are injected into the electrical part body. 1 circuits are used in this analogue multiplexer. Use ADG508 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 300Ohm. Datasheets for functions of 20 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. It is recommended that the electrical component receives a voltage of 10.8V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Operating 8 inputs is required. Resistivity from Drain to Source is 450Ohm for this electronic part.