Name: ADG436BRZ
Brand: Hotenda
SKU: ADG436BRZ
Price: 8.43000 USD
Availability: InStock

new-10%

ADG436BRZ

Manufacturer part number:ADG436BRZ

Manufacturer:Hotenda

Description:70ns, 60ns (Typ) SPDT 12Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG436 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ADG436BRZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	25Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.3mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG436
Pin Count	16
Number of Outputs	4
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	2
Interface	Parallel
Max Supply Voltage	30V
Min Supply Voltage	3V
Test Frequency	1MHz
Nominal Supply Current	50μA
Power Dissipation	5.3mW
Max Supply Current	350μA
Turn On Delay Time	125 ns
Voltage - Supply, Single/Dual (±)	3V~30V ±3V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	12Ohm Typ
Min Dual Supply Voltage	3V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	13pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	70ns, 60ns (Typ)
Charge Injection	10pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Max Junction Temperature (Tj)	150°C
Drain to Source Resistance	12mOhm
On-State Resistance	20Ohm
Height	1.75mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG436BRZ Product Details

ADG436BRZ Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Totally, there are 16 terminations. The electronic part provides high-quality output because it has 2 channels. An 15V voltage supply should allow the electrical part to be turned on and run. The electrical component body receives 16 pins. A SPDT switching circuit is used for these analog switches. Search with ADG436 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 25Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 30V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 3V as the lowest voltage for the electrical part. A voltage higher than 350μA may cause damage to the switch multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using dual power supplies, you should attach at least 3V. Operating voltages of 12V are compatible with the electrical part. There is 12mOhm resistance between Drain and Source for this electronic part. Multiplexer ics with 4 outputs are available.