ADG431BN Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. The electrical component body receives 16 pins. SPST - NC switching circuits are used in these analog switch ics. Try searching with ADG431 to find analog multiplexer variants. A 24Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 25V. This multiplexer would work with 100mA current. The analogue multiplexer may be damaged if voltage is greater than 100nA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. The electrical part can be operated at 12V voltage levels. This electrical component also includes additional features such as ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY. There is 17mOhm Drain to Source resistance on this electronic part. This digital multiplexer requires 13.5V voltage as a minimum supply voltage.
ADG431BN Features
4 Channels
Switch Circuit: SPST - NC
100mA Supply Current
Additional Features: ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY
Drain-to-Source resistance: 17mOhm
ADG431BN Applications
There are a lot of Analog Devices Inc. ADG431BN Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- Video switching
- ISDN NT1/TA
- Wireless Local Loop
- Remote Powered Equipment
- 65 V DACs
- Cell phones
- E1 Network Equipment
- Battery Powered Systems
- Automotive applications
