ADG408BRU Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A electrical component with 8 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Circuits number 1 make up this analogue multiplexer. Look for analog switch ic variants by searching with ADG408. A 100Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 32V. It is recommended to use 5V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 100μA current. A voltage higher than 200μA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIntegrated with an analog IC SINGLE-ENDED MULTIPLEXER. This electrical part is compatible with 12V operating voltages. Among the inputs that can be operated are the 8 inputs.
ADG408BRU Features
8 Channels
100μA Supply Current
ADG408BRU Applications
There are a lot of Analog Devices Inc.
ADG408BRU Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
