ADG202AKNZ Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Look for analog switch ic variants by searching with ADG202. A 90Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 25V. A analog switch ic that has a cost-effective Dual supply type. The analogue multiplexer could operate on 600μA current. A voltage higher than 2mA may cause damage to the switch multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 22VThis electrical part is compatible with 15V operating voltages. There is 60mOhm Drain to Source resistance on this electronic part.
ADG202AKNZ Features
4 Channels
Switch Circuit: SPST - NO
600μA Supply Current
Drain-to-Source resistance: 60mOhm
ADG202AKNZ Applications
There are a lot of Analog Devices Inc.
ADG202AKNZ Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
