ADG1634BRUZ Overview
Shipping overseas is convenient with the electronic component packed in 20-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~125°C TA extended. Totally, there are 20 terminations. A 1 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. 20 pins are injected to the electronic part body. Unlike digital switches, these are based on SPDT switching circuits. Try searching for the analog switch ic with ADG1634 if you are looking for variants. Analog switches have 4.5Ohm internal resistance. Datasheets for 20 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 16V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. 3.3V is the lowest voltage the electrical component should receive. Put voltage above 480μA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 8V. The voltage should be at least 3.3V if you are using dual power supplies. It is possible to operate 4 inputs. There are 103MHz bandwidths for data transfer. Resistivity from Drain to Source is 4.5Ohm for this electronic part. In this digital multiplexer, there are 8 outputs.
ADG1634BRUZ Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 109MHz
Bandwidth: 103MHz
Drain-to-Source resistance: 4.5Ohm
ADG1634BRUZ Applications
There are a lot of Analog Devices Inc. ADG1634BRUZ Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- Fiber to the Home
- DSUs
- Access Concentrators
- Microwave transmission systems
- PCMCIA cards
- Avionics and Military Systems
- SONET/SDH ADM
- RGB switches
- Avionics test equipment
