Name: ADG1611BCPZ-REEL7
Brand: Hotenda
SKU: ADG1611BCPZ-REEL7
Price: 5.56000 USD
Availability: InStock

new-10%

ADG1611BCPZ-REEL7

Manufacturer part number:ADG1611BCPZ-REEL7

Manufacturer:Hotenda

Description:156ns, 87ns SPST - NC 1.1Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1611 16 Pins 300pA 16-VQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1611BCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	26 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.1Ohm
Terminal Finish	MATTE TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.8mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Terminal Pitch	0.635mm
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG1611
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Power Supplies	3.3/12/+-5V
Interface	Parallel
Max Supply Voltage	16V
Min Supply Voltage	3.3V
Test Frequency	1MHz
Operating Supply Current	320μA
Power Dissipation	5.8mW
Max Supply Current	480μA
Throw Configuration	SPST
Turn On Delay Time	212 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3.3V~16V ±3.3V~8V
Supply Type	Dual, Single
Bandwidth	42MHz
Turn-Off Delay Time	137 ns
Max Dual Supply Voltage	8V
-3db Bandwidth	38MHz
On-State Resistance (Max)	1.1Ohm
Min Dual Supply Voltage	3.3V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	300pA
Channel Capacitance (CS(off), CD(off))	60pF 60pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	156ns, 87ns
Charge Injection	170pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-110dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	1.1Ohm
Normal Position	NO
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1611BCPZ-REEL7 Product Details

ADG1611BCPZ-REEL7 Overview

Due to its 16-VQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. In total, there are 16 terminations. It is part of the design of the 16 series that this electronic component is included. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for ADG1611 variants of the analog switch ic. The internal resistance of this digital multiplexer is 1.1Ohm. The functions of 16 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 16V volts for the multiplexer. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 3.3V. An operating current of 320μA would be sufficient for this switch device. If you put voltage higher than 480μA on the digital multiplexer, damage may occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 8V. For dual power supplies, a voltage of at least 3.3V should be attached. This analog switch ic utilizes SEPARATE OUTPUT output. It is possible to operate 4 inputs. In 42MHz-bandwidths, data can be transferred. Drain to Source resistance for this electronic component is 1.1Ohm.