Name: ADG1423BRMZ
Brand: Hotenda
SKU: ADG1423BRMZ
Price: 5.48000 USD
Availability: InStock

new-10%

ADG1423BRMZ

Manufacturer part number:ADG1423BRMZ

Manufacturer:Hotenda

Description:145ns, 145ns SPST - NO/NC 2.4Ohm Analog Switches BREAK-BEFORE-MAKE ADG1423 10 Pins 500pA 5V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG1423BRMZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	2.4Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.8mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1423
Pin Count	10
Operating Supply Voltage	12V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	1.8mW
Max Supply Current	190μA
Turn On Delay Time	145 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	2.4Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	18pF 22pF
On-state Resistance Match-Nom	0.04Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	145ns, 145ns
Insertion Loss (dB)	0.12 dB
Charge Injection	-5pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-74dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	395ns
Drain to Source Resistance	5.2Ohm
Height	1.1mm
Length	3.1mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1423BRMZ Product Details

ADG1423BRMZ Overview

Presented in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 10 terminations. A high-quality output is provided by the electrical component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 10 pins are injected into the electrical part body. A SPST - NO/NC switching circuit is used for these analog switches. Using the ADG1423 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 2.4Ohm. For details about the functions of 10 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 5V is the lowest voltage the electrical component should receive. Putting voltage greater than 190μA on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 16.5V. With dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 12V voltage levels. The 2 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 180MHz bandwidths. A Drain to Source resistance of 5.2Ohm is shown for this electronic part.