Name: ADG1419BRMZ-REEL7
Brand: Hotenda
SKU: ADG1419BRMZ-REEL7
Price: 5.14000 USD
Availability: InStock

new-10%

ADG1419BRMZ-REEL7

Manufacturer part number:ADG1419BRMZ-REEL7

Manufacturer:Hotenda

Description:110ns, 140ns SPDT 2.4Ohm Analog Switches BREAK-BEFORE-MAKE ADG1419 8 Pins 500pA 15V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG1419BRMZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	2.4Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	2mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG1419
Pin Count	8
Number of Outputs	2
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	2mW
Max Supply Current	95μA
Turn On Delay Time	110 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	135MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	140 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	2.4Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	64 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	19pF 44pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	110ns, 140ns
Insertion Loss (dB)	0.16 dB
Charge Injection	-16pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-64dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1419BRMZ-REEL7 Product Details

ADG1419BRMZ-REEL7 Overview

This electronic part is conveniently packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -40°C~125°C TA. 8 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 8 series. Based on SPDT switching circuits, these analog multiplexers work. Use ADG1419 to search for variants of the digital switches. There is 2.4Ohm internal resistance in this digital multiplexer. Datasheets for 8 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. Dual, Single supply type digital switch with a low cost. 5V should be the lowest voltage fed to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 95μA. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. The voltage should be at least 4.5V if you are using dual power supplies. 12V operating voltages can be used with this electrical part. In order to operate the 1 inputs, there are several steps to follow. In 135MHz-bandwidths, data can be transferred. This digital multiplexer has 2 outputs.