Name: ADG1412YCPZ-REEL
Brand: Hotenda
SKU: ADG1412YCPZ-REEL
Price: 7.59000 USD
Availability: InStock

new-10%

ADG1412YCPZ-REEL

Manufacturer part number:ADG1412YCPZ-REEL

Manufacturer:Hotenda

Description:150ns, 120ns SPST - NO 1.8Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1412 16 Pins 550pA 5V 16-VQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1412YCPZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	20 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-VQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	1.8Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	4.97mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1412
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	4.97mW
Max Supply Current	380μA
Turn On Delay Time	150 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	170MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	120 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.8Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	550pA
Channel Capacitance (CS(off), CD(off))	23pF 23pF
On-state Resistance Match-Nom	0.13Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 120ns
Insertion Loss (dB)	-0.35 dB
Charge Injection	-20pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-100dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	510ns
Switch-off Time-Max	380ns
Normal Position	NO
Height Seated (Max)	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1412YCPZ-REEL Product Details

ADG1412YCPZ-REEL Overview

This electronic part is conveniently packaged in 16-VQFN Exposed Pad, CSP, making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. Multiplexers built on a SPST - NO switching circuit are built. Use ADG1412 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 1.8Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 16.5V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 5V voltage fed to the electrical part below 5V. It may damage the digital multiplexer if the voltage is higher than 380μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. For dual power supplies, a voltage of at least 4.5V should be attached. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. This electrical part is compatible with 12V operating voltages. A 4 input needs to be operated. The transfer of data can be performed over 170MHz bandwidths.