Name: ADG1401BRMZ
Brand: Hotenda
SKU: ADG1401BRMZ
Price: 4.86000 USD
Availability: InStock

new-10%

ADG1401BRMZ

Manufacturer part number:ADG1401BRMZ

Manufacturer:Hotenda

Description:150ns, 150ns SPST - NO 1.3Ohm Analog Switches BREAK-BEFORE-MAKE ADG1401 8 Pins 400pA 5V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:ADG1401BRMZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	1.3Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.44mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG1401
Pin Count	8
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Power Dissipation	1.44mW
Max Supply Current	95μA
Turn On Delay Time	150 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	120MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	1.3Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	58 dB
Current - Leakage (IS(off)) (Max)	400pA
Channel Capacitance (CS(off), CD(off))	36pF 41pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Insertion Loss (dB)	0.08 dB
Charge Injection	-12pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	375ns
Normal Position	NO
Height	950μm
Length	3.2mm
Width	3.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1401BRMZ Product Details

ADG1401BRMZ Overview

The electrical component comes in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around -40°C~125°C TA. A total of 8 terminations have been recorded. The electronic part provides high-quality output because it has 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 8 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. Use ADG1401 to search for variants of the digital switches. Analog switches have 1.3Ohm internal resistance. For functions related to 8 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 5V should be applied to the electronic component. When the digital multiplexer is charged above 95μA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. With dual power supplies, you should attach at least 4.5V. This electrical part is compatible with 12V operating voltages. There are 1 inputs to be operated. This switch operates within the bandwidth of 120MHz.