Name: ADG1213YCPZ-REEL7
Brand: Hotenda
SKU: ADG1213YCPZ-REEL7
Price: 5.30000 USD
Availability: InStock

new-10%

ADG1213YCPZ-REEL7

Manufacturer part number:ADG1213YCPZ-REEL7

Manufacturer:Hotenda

Description:130ns, 115ns SPST - NO/NC 190Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG1213 16 Pins 100pA 15V 16-WFQFN Exposed Pad, CSP

Case Package:SOT-23

Datasheet:ADG1213YCPZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Resistance	190Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	150μW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG1213
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Test Frequency	1MHz
Operating Supply Current	220μA
Power Dissipation	3.8mW
Max Supply Current	380μA
Throw Configuration	SPST
Turn On Delay Time	130 ns
Voltage - Supply, Single/Dual (±)	5V~16.5V ±4.5V~16.5V
Supply Type	Dual, Single
Bandwidth	1 GHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	115 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	190Ohm
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	1.1pF 1.2pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	130ns, 115ns
Charge Injection	-0.3pC
Channel-to-Channel Matching (ΔRon)	2.5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	125ns
Height Seated (Max)	0.9mm
Length	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG1213YCPZ-REEL7 Product Details

ADG1213YCPZ-REEL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-WFQFN Exposed Pad, CSP. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. The total number of terminations is 16. As a result of its 4 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Use ADG1213 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 190Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 16.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 5V should be applied to the electronic component. This multiplexer would work with 220μA current. If you put voltage higher than 380μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. A dual power supply should have at least 4.5V voltage attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. A voltage of 12V can be used to operate the electronic component. There are various bandwidths available for data transfer.