ADF4001BRUZ-RL Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. As a result of this, we can find 16 terminations. Clock generator ics require a voltage of 3V. This clock generator receives its inputs from CMOS, TTL, which is designed to be the clock source. To access the full performance of the electronic component, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock generators should operate with the voltage supply of 2.7V~5.5V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. As the name suggests, this is a clock generator that is compatible with Clock logic levels. It is possible to classify this electronic component as a Clock Generator (RF). This clock-generating IC is a 16-bit device designed explicitly for microprocessors. This part number is related to its related electronic parts. There is a 16 pin that is available on the digital clock generator. The supply voltage should be maintained at 5V for high efficiency. 2 signal outputs enable clock PLL to magnify output frequency as high as possible. A supply current of 4.5mA is required to fully operate clock PLL.
ADF4001BRUZ-RL Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 5V
ADF4001BRUZ-RL Applications
There are a lot of Analog Devices Inc. ADF4001BRUZ-RL Clock Generators applications.
- DVD add-on cards for multimedia PCs
- Satellite navigation communication
- Phase modulation cellular systems
- Cellular/4G
- Cable television converter boxes
- Camera systems
- Clock recovery
- Clock synchronization
- Smartphones
- Line cards used in telephone exchange
