ADA4851-2WYRMZ-R7 Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. Voltage Feedback-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 3.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 6.4mA . 107dB should remain the voltage gain. Op amp ic has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The Automotive indicates the series number of the op amp. Currently, linear amplifier is operating with a quiescent current of 3.2mA.
ADA4851-2WYRMZ-R7 Features
8 Pins
supply voltage of 5V
107dB voltage gain
Output Type: Rail-to-Rail
ADA4851-2WYRMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4851-2WYRMZ-R7 Instrumentational OP Amps applications.
- Automotive sensors
- Broadcasting
- Ultrasound transducers
- Voltage regulation circuit
- Semiconductor detectors
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Professional videography
- Weak signal detection
- earphone
