ADA4661-2ARMZ-R7 Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 10V battery. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 630μA volt supply current is needed for this linear amplifier to operate. On this instrumentation amplifier, there are 2 circuits that are connected together. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There is an 630μA quiescent current running through op amp ic.
ADA4661-2ARMZ-R7 Features
8 Pins
supply voltage of 10V
Output Type: Rail-to-Rail
ADA4661-2ARMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4661-2ARMZ-R7 Instrumentational OP Amps applications.
- Micro signal measurement
- Semiconductor detectors
- Broadcasting
- Oscilloscopes
- Active probe
- Signal operation
- Weighing systems
- Fission chambers
- Test and measurement instruments
- Displayers for aircraft and air transportation control systems
