ADA4084-1ARJZ-R2 Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. The op amp ic has an array of 5 pins on it. Op amp rates 40μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 625μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 104dB for the time being. A instrumentation amplifier like this has 1 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. There is a recommendation that this electrical part be used with a supply with 625μA current rating. This electric component can work from a voltage of under 30V as far as supply voltage is concerned. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part.
ADA4084-1ARJZ-R2 Features
104dB voltage gain
Output Type: Rail-to-Rail
ADA4084-1ARJZ-R2 Applications
There are a lot of Analog Devices Inc.
ADA4084-1ARJZ-R2 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
