Name: AD9283BRS-100
Brand: Hotenda
SKU: AD9283BRS-100
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Subcategory	Analog to Digital Converters
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	AD9283
Pin Count	20
Operating Supply Voltage	3V
Polarity	Unipolar
Power Supplies	3V
Configuration	S/H-ADC
Number of Channels	1
Max Supply Voltage	3.6V
Min Supply Voltage	2.7V
Power Dissipation	120mW
Number of Bits	8
Input Type	Differential, Single Ended
Architecture	Pipelined
Converter Type	ADC, PROPRIETARY METHOD
Reference Type	Internal
Data Interface	Parallel
Resolution	1 B
Sampling Rate	100 Msps
Voltage - Supply, Analog	2.7V~3.6V
Voltage - Supply, Digital	2.7V~3.6V
Number of Analog In Channels	1
Sampling Rate (Per Second)	100M
Output Bit Code	OFFSET BINARY
Integral Nonlinearity (INL)	2.25 LSB
Sample and Hold / Track and Hold	TRACK
Ratio - S/H:ADC	1:1
Height Seated (Max)	2mm
Length	7.2mm
Width	5.3mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

AD9283BRS-100 Product Details

AD9283BRS-100 Overview

The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 20-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 100M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD9283 family.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3V.The ADC converter operates from 3V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 120mW.The number of channels is growing strong/weak: 1.