AD9238BST-20 Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 64-LQFP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 64 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 2 channels.The is equipped with 64 pin count.The peak reflow temperature (Cel) amounts to 240 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 20M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 64 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD9238 family.The supply/digital voltage of this electrical AD converter is 2.25V~3.6V.ADC converters can be mounted using Surface Mount.The ADC converter operates with the maximal supply voltage of 3.6V.2 inputs are employed.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3V.The maximal analog input voltage of this electrical AD converter is 2V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 212mW.The minimal analog input voltage of this electrical AD converter is 1V.Simultaneous Sampling can be ensured when operating.
AD9238BST-20 Features
1 Functions
64 basic kinds of terminations
64 pin count
Minimal supply voltage of 2.7V
AD9238BST-20 Applications
There are a lot of Analog Devices Inc. AD9238BST-20 ADC applications.
- High Speed Data Acquisition
- 3-phase power control
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Smart antenna systems
- Communications
- Multicarrier, multimode digital receivers
- Battery Operated Systems
- Instrumentation and test equipment
- Cell Phones
- Uninterrupted Power Supplies
