Name: AD8510ARZ
Brand: Hotenda
SKU: AD8510ARZ
Price: 3.43000 USD
Availability: InStock

new-10%

AD8510ARZ

Manufacturer part number:AD8510ARZ

Manufacturer:Hotenda

Description:1 Channels 70mA per Channel 25pA 100 dB Instrumentational OP Amps 0.0075μA ±4.5V~18V AD8510 8 Pins 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:AD8510ARZ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	JFET
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	AD8510
Pin Count	8
Qualification Status	Not Qualified
Number of Channels	1
Operating Supply Current	2.5mA
Max Supply Current	2.3mA
Quiescent Current	2.5mA
Slew Rate	20V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	100 dB
Current - Input Bias	25pA
Voltage - Supply, Single/Dual (±)	±4.5V~18V
Output Current per Channel	70mA
Input Offset Voltage (Vos)	400μV
Bandwidth	8MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	8000 kHz
Voltage Gain	100.59dB
Average Bias Current-Max (IIB)	0.0075μA
Power Supply Rejection Ratio (PSRR)	130dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	100μV
Settling Time	900 ns
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Dual Supply Voltage	9V
Input Capacitance	12.5pF
Input Voltage Noise Density	34nV/sqrt Hz
Height	1.5mm
Length	5mm
Width	4mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8510ARZ Product Details

AD8510ARZ Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the J-FET type. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 400μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 2.5mA . 100.59dB should remain the voltage gain. There are a total of 1 channels available on the op amps. Buffer amplifier has a quiescent current of 2.5mA.