AD848SQ/883B Overview
Packaged in a 8-CDIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.3mV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -55°C~125°C . 82.28dB should remain the voltage gain. The linear amplifier consists of 1 different elements in total. As a result, it is recommended that a power supply of 5.1mA be used with this electronic part. Currently, linear amplifier is operating with a quiescent current of 4.8mA.
AD848SQ/883B Features
8 Pins
supply voltage of 15V
82.28dB voltage gain
AD848SQ/883B Applications
There are a lot of Analog Devices Inc.
AD848SQ/883B Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
