AD847JN

Manufacturer part number:AD847JN

Manufacturer:Hotenda

Description:1 Channels 32mA per Channel 3.3μA 95 dB Instrumentational OP Amps 7.2μA ±4.5V~18V AD847 8 Pins 8-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:AD847JN Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Contact Plating	Lead, Tin
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Max Power Dissipation	1.2W
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	AD847
Pin Count	8
Number of Channels	1
Operating Supply Current	5.3mA
Nominal Supply Current	5.3mA
Power Dissipation	1.2W
Quiescent Current	4.8mA
Slew Rate	300V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	95 dB
Current - Input Bias	3.3μA
Voltage - Supply, Single/Dual (±)	±4.5V~18V
Output Current per Channel	32mA
Input Offset Voltage (Vos)	1mV
Gain Bandwidth Product	50MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	35000 kHz
Voltage Gain	70.88dB
Average Bias Current-Max (IIB)	7.2μA
Power Supply Rejection Ratio (PSRR)	86dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	500μV
Settling Time	120 ns
Bias Current-Max (IIB) @25C	6.6μA
Input Capacitance	1.5pF
Input Voltage Noise Density	15nV/sqrt Hz
Height Seated (Max)	5.33mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

AD847JN Product Details

AD847JN Overview

There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tube case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. In terms of input offset voltage, operational amplifier rates 1mV. For this electrical component, Through Hole is the recommended mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 5.3mA can be used to operate this linear amplifier. 70.88dB should be the voltage gain. There are 1 channels on the operational amplifiers. Buffer amplifier has a quiescent current of 4.8mA.