AD827SE/883B Overview
The linear amplifier is packaged in a LCC case which makes it easy for the consumer to handle. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. We are approaching the 20h termination of the year. The pins on this board total to 20 in total. Please take in mind that op amp should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 20 pins on it. In terms of input offset voltage, operational amplifier rates 2mV. Using an 13.5mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 70.88dB. It is recommended that the temperature of this op amp ic should not fall below -55°C degrees Fahrenheit at any time. Use op amps only at temperatures no higher than 125°C. A voltage rating of 2 is indicated for the op amp's operating supply voltage. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. Keeping the linear amplifier's supply voltage above 9V is recommended. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V. Linear amplifier has a quiescent current of 5.25mA.
AD827SE/883B Features
20 Pins
supply voltage of 15V
70.88dB voltage gain
AD827SE/883B Applications
There are a lot of Analog Devices Inc. AD827SE/883B Instrumentational OP Amps applications.
- Signal filtering
- PDA
- Video computer boards
- Exponential operation circuits
- Vehicle electronics
- Instrumentation
- Large motor controllers
- Inverse/same-phase proportional circuit
- Wireless base stations
- Addition operation circuits
