AD8226ARMZ-R7 Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Instrumentation type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. A total of 8 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. 8 pins are located on the operational amplifiers. Op amp ic rates 200μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 400μA . There should be no change in the voltage gain at 60dB. Op amp ic has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. In order for the buffer amplifier resistance to remain within the 800MOhm range, the device should be tested.
AD8226ARMZ-R7 Features
8 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 800MOhm
AD8226ARMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8226ARMZ-R7 Instrumentational OP Amps applications.
- Division circuits
- Semiconductor detectors
- Power generator
- Navigation
- Portable docking station
- Radar
- Commercial audio systems
- Medical instruments
- Micro signal measurement
- Home audio systems
