AD8216WYRZ-R7 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. A Differential-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 10μV. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 2mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 9.54dB. In total, there are 1 circuits on this buffer amplifier. Buffer op amp is equipped with 1 channels on the device. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. It is recommended that op amp be used at temperatures below 125°C. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result, it is recommended that a power supply of 1mA be used with this electronic part. With regard tp supply voltage, op amp is used under 5.5V. To keep the buffer amps' supply voltage higher than 4.5V. Instrumentation amplifiers are numbered by their Automotive series. During testing, the buffer amplifier resistance should remain within a range of 400kOhm.
AD8216WYRZ-R7 Features
9.54dB voltage gain
Resistance of 400kOhm
AD8216WYRZ-R7 Applications
There are a lot of Analog Devices Inc. AD8216WYRZ-R7 Instrumentational OP Amps applications.
- Multiplication circuits
- Weak signal detection
- Vehicle electronics
- Navigation
- Displayers for aircraft and air transportation control systems
- Image computer boards
- Differentiator circuits
- Radiation thermometry transducers
- PDA
- Portable media players
