AD8091ARTZ-R2 Overview
Op amp is packaged in SC-74A, SOT-753 case. Buffer amps of this type are called Voltage Feedback-types. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. In this case, there are 5 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 5 pins. The input offset voltage is 1.6mV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 4.8mA . Op amp is a member of the 98dB's 98dB family. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The operating supply voltage of the buffer op amp is rated at 5V. The quiescent current is 5.5mA.
AD8091ARTZ-R2 Features
5 Pins
supply voltage of 5V
98dB voltage gain
Output Type: Rail-to-Rail
AD8091ARTZ-R2 Applications
There are a lot of Analog Devices Inc. AD8091ARTZ-R2 Instrumentational OP Amps applications.
- Mobile phone
- Instrumentation
- Digital cameras
- Biopotential
- Signal amplification
- Information processing
- RF cable systems
- Tablets
- earphone
- Weak signal detection
