AD8057ARZ-REEL7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called Voltage Feedback-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There are 8 pins on this chip. The input offset voltage is 5mV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . You can run this op amp ic on 7.5mA . 55dB should be the voltage gain. A instrumentation amplifier like this has 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 85°C. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. It is recommended that this electronic component be used with an 6mA supply. Under 12V is the minimum supply voltage for this electric component. A voltage of 3V or higher is recommended for the linear amplifier's supply voltage. Conduct linear amplifier under the dual suuply voltage of 6V. The quiescent current is 6mA. In total, there are 1 op amps on the device.
AD8057ARZ-REEL7 Features
55dB voltage gain
AD8057ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8057ARZ-REEL7 Instrumentational OP Amps applications.
- Radar
- Power control
- Multiplication circuits
- Semiconductor detectors
- Test equipment
- Weighing systems
- Cinema or auditorium audio system
- Strain gauges
- single/dual op amp sum and difference circuits
- Radiation thermometry transducers
