AD8045ARDZ Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case which makes it easy for the consumer to handle. A Voltage Feedback-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. Op amp ic rates 1.4mV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. An 16mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 63dB. The op amp ic has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Buffer amplifier has a quiescent current of 19mA.
AD8045ARDZ Features
8 Pins
supply voltage of 5V
63dB voltage gain
AD8045ARDZ Applications
There are a lot of Analog Devices Inc. AD8045ARDZ Instrumentational OP Amps applications.
- Non-polarized electrodes
- single/dual op amp sum and difference circuits
- Thermocouples
- Division circuits
- Medical instruments
- Video data acquisition
- Scintillation detectors
- Television broadcasting equipment
- Polarized electrodes
- Fission chambers
