AD8005ARZ Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Current Feedback-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 30mV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. As long as the supply current of the chip does not exceed 425μA, this op amp ic can operate. There should be no change in the voltage gain at 120dB. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 5V voltage. There is an 425μA quiescent current running through op amp ic.
AD8005ARZ Features
8 Pins
supply voltage of 5V
120dB voltage gain
AD8005ARZ Applications
There are a lot of Analog Devices Inc. AD8005ARZ Instrumentational OP Amps applications.
- Car stereo
- Digital cameras
- Proportional operation circuits
- Television broadcasting equipment
- Measurements of Wheatstone bridge
- Test and measurement instruments
- Information processing
- Vehicle electronics
- Television
- Band-pass filter
