AD7741BNZ Overview
This package is embedded in the 8-DIP (0.300, 7.62mm) package. Electronic part Through Hole is mounted in this way. There is a package in the way of Tube. In this case, an electrical device of type Voltage to Frequency is being used. The 8 termination of a transmission line is the practice of terminating it with a device whose characteristic impedance matches that of the transmission line. Devices equipped with a 8 pin count are available. Providing power to the device is a supply voltage of 5V. It is possible to discover parts that are related to the base part number. When a computer or other device is connected to the Internet, there are 8 pins, which are pronged contacts. For its reliability, it operates at a minimum operating temperature of -40°C. To ensure reliability, the device operates at a maximum operating temperature of 85°C. Through Hole mounted in the way. The supply voltage (Vsup) should be greater than 4.75V if it is suitable for use. As a result, 5.25V is reaching its maximum supply voltage (Vsup). There is a frequency 6.144MHz that it operates at. It is important that 8mA receives a sufficient supply current in order to perform properly. There are electronic parts with a maximum input type of 2.5V. There is a voltage of 5V at which this electrical device operates. The type of supply for this electronic component is Single. A reference voltage of 2.5V is provided by this electrical device.
AD7741BNZ Features
8-DIP (0.300, 7.62mm) package
8 terminations
8 pin count
8 pins
AD7741BNZ Applications
There are a lot of Analog Devices Inc.
AD7741BNZ V/F & F/V Converters applications.
- Clutch Control
- Horn Control
- Touch or Sound Switches
- lsolation of High Common-Mode Voltages
- Low-Cost Analog-to-Digital Conversion
- Battery Monitoring
- Automotive Sensing
- Voltage to Frequency Conversions
- Frequency to Voltage Conversions
- Remote-Sensor Monitoring
