AD744BQ Overview
The linear amplifier is packaged in a 8-CDIP (0.300, 7.62mm) case. J-FET-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. Op amp rates 500μV as input offset voltage. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 3.5mA . You should keep the voltage gain at 112.04dB for the time being. A voltage rating of 1 is indicated for the op amp's operating supply voltage. Buffer amplifier has a quiescent current of 3.5mA.
AD744BQ Features
8 Pins
supply voltage of 15V
112.04dB voltage gain
AD744BQ Applications
There are a lot of Analog Devices Inc. AD744BQ Instrumentational OP Amps applications.
- RF cable systems
- Commercial audio systems
- Industrial control system
- E-book readers
- Video data acquisition
- pH (acidity)
- Television
- earphone
- Wireless base stations
- Proportional counter tubes
