AD711KRZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the J-FET-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 1mV. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . A supply current of 2.8mA can be used to operate this linear amplifier. 112.04dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. For packing the buffer amplifier, the TR-axis is adopted. 2.8mA quiescent currents are flowing through buffer op amp.
AD711KRZ-REEL7 Features
8 Pins
supply voltage of 15V
112.04dB voltage gain
AD711KRZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD711KRZ-REEL7 Instrumentational OP Amps applications.
- High speed sample
- Ultrasound transducers
- Weighing systems
- Home audio systems
- Oscilloscopes
- earphone
- Medical imaging
- Micro signal measurement
- Radar
- Image computer boards
