AD203SN Overview
Packaged in a 38-DIP (0.500, 12.70mm), 11 Leads case, the buffer op amp is ready to use. Isolation-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tube case. It has 11 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . A supply current of 20mA can be used to operate this linear amplifier. A linear amplifier like this has 1 circuits on it. There are 1 channels on the operational amplifiers. To operate this buffer amplifier, the temperature must not be lower than -55°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 15V voltage. It is recommended that this electronic component be used with an 20mA supply. It is important to keep in mind that the power supply voltage of this electric component is below 16V, which is suitable. To keep the buffer amps' supply voltage higher than 12V. A total of 1 instrumentation amplifiers are present on the device.
AD203SN Features
AD203SN Applications
There are a lot of Analog Devices Inc. AD203SN Instrumentational OP Amps applications.
- Video data acquisition
- Proportional counter tubes
- Test and measurement instruments
- Automation control systems
- Portable electronic products powered by batteries
- Information processing
- Tablets
- Portable media players
- Laptop
- Video computer boards
