AD202KN Overview
In order to protect the op amps, a 38-DIP (0.600, 15.24mm), 11 Leads case is used. Buffer amps of this type are called Isolation-types. Instrumentation amplifier is delivered in a Tube case. In total, the buffer amplifier consists of 10 pins. Regarding input offset voltage, buffer amplifier rates 5mV voltage. Through Hole is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureAn 5mA volt supply current is needed for this linear amplifier to operate. 40dB should be the voltage gain. In total, there are 2 circuits on this buffer amplifier. There are a total of 1 channels available on the op amps. The temperature should not be lower than -40°C for operational amplifier ics to operate. At temperatures greater than 85°C, Instrumentation amplifier should not be used. The op amp is rated for an operating supply voltage of 1. The operating supply voltage of instrumentation amplifier is rated 15V voltage. In order to ensure optimal performance, an 5mA supply is recommended for this electrical component. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 16.5V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 13.5V, it is recommended to keep it higher. During testing, the instrumentation amplifier resistance should remain within a range of 2GOhm. A total of 1 instrumentation amplifiers are present on the device.
AD202KN Features
40dB voltage gain
Resistance of 2GOhm
AD202KN Applications
There are a lot of Analog Devices Inc. AD202KN Instrumentational OP Amps applications.
- Home audio systems
- Television broadcasting equipment
- Power transmission
- Portable docking station
- Micro signal measurement
- Non-polarized electrodes
- Power control
- Radar
- pH (acidity)
- Tablets
