5962-9098001MXA Overview
Packaging for the buffer amplifier is in the form of a 20-CLCC case. The instrumentation amplifier in this picture is of the General Purpose-type. A Box case is used to deliver the buffer op amp. There are 12 pins on this chip. Op amp rates 2mV as input offset voltage. This electronic part is best mounted with type Surface Mount. You should keep the voltage gain at 89.54dB for the time being. The buffer amp consists of 1 circuits in total. There are 1 channels on the operational amplifiers. It is recommended that the temperature of this op amp ic should not fall below -55°C degrees Fahrenheit at any time. At temperatures greater than 125°C, Instrumentation amplifier should not be used. Op amp has total of 1 elements. We recommend that you use this electronic part with an 12mA supply in order to get the best performance from it. The electrical part is capable of being powered by a voltage of under 18V, which means that it can be used with any voltage supply. In order to conduct this part, you will need to provide dual supply voltages of 18V volts.
5962-9098001MXA Features
89.54dB voltage gain
5962-9098001MXA Applications
There are a lot of Analog Devices Inc. 5962-9098001MXA Instrumentational OP Amps applications.
- Signal amplification
- Subtraction operation circuits
- Automotive sensors
- Integrator circuits
- High-frequency data acquisition systems
- Fission chambers
- Biopotential
- Radiation thermometry transducers
- Power generator
- Band-pass filter
