N80C186-12 Overview
The microprocessor is convenient for international shipping since it is packaged in PLCC. uPs/uCs/Peripheral ICs are a MICROPROCESSOR. To date, there have been 68 terminations. You should be able to turn on and run the embedded microprocessor with a voltage supply of 5V. An architecture based on 16 bits is used. Datasheets for 68 pin functions can be found here. A maximum supply current of 5.5V is available. The embedded microprocessor is a typical Microprocessors. To transfer data, there is a bandwidth of 16b. If the temperature is higher than 70°C, the microprocessor should not operate. A total of 68 pins are injected into the CPU microprocessor's body. It is expected that the CPU will reach a top frequency of 12MHz. According to the datasheet, the embedded microprocessor requires 5V power supply. CPU voltages cannot exceed 65mA. The embedded microprocessor also includes the following features: DRAM REFRESH CONTROL UNIT; PROGRAMMABLE INTERRUPT CONTROLLER. Hardware interrupts can be dealt with by terminating 5 external interrupts. In DMA (Direct Memory Access), 2 channels are applied.
N80C186-12 Features
16-Bit Structure
16b-Bit Data Bus Width
N80C186-12 Applications
There are a lot of AMD
N80C186-12 Microprocessor applications.
- Equipment control
- Instrument control
- Consumer electronics products
- Toys
- Robots
- Radio
- Television
- Heater/Fan
- Calculator
- Kindle
