ACS759LCB-100B-PFF-T Overview
Safety precautions are taken by putting the current sensors in 5-CB Formed Leads, PFF packages. In order to protect the devices from damage, these current sensors are packaged in the Tube. Current sensors should not provide currents greater than 13.5mA. In the current sensors, the terminations are 5. Currently, this sensor has 6 pins. When they are operated, the current sensors can provide 3.3V voltage. During operation, these current sensors are capable of supplying a voltage of 3.3V. Current sensors should be set to 3V for the minimum voltage supply. Current sensors should produce a 1mA output. While these electronic components are functioning, the current supplied by them should be 10mA.
ACS759LCB-100B-PFF-T Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 3V~3.6V
Frequency: DC~120kHz
Sensing Current: 100A
5-CB Formed Leads, PFF Package
ACS759LCB-100B-PFF-T Applications
There are a lot of Allegro MicroSystems ACS759LCB-100B-PFF-T Current Sensors applications.
- DC motor drives
- Uninterruptible Power Supplies(UPS)
- Overcurrent protection
- Monitor Motor Operation
- Continuity
- Battery supplied applications
- Switched Mode Power Supplies(SMPS)
- Inverter and H-bridge current measurements
- Power supply management
- Frequency, Voltage, and Solar Inverters
