ACS710KLATR-6BB-T Overview
For safety reasons, the current sensors are packaged in 16-SOIC (0.295, 7.50mm Width) packages. In order to protect the devices from damage, these current sensors are packaged in the Tape & Reel (TR). Current sensors should not supply more current than 14.5mA. There is a termination of 16 on the current sensors. This current sensor has 16 pins. While working, these current sensors can supply voltage of 3.3V. Current sensors should be set to 3V for the minimum voltage supply. However, the voltage supplied by current sensors should not exceed 5.5V. There are 16 pins on this electronic part. When these electronic components are operating, they should supply 11mA current.
ACS710KLATR-6BB-T Features
Moisture Sensitivity Level: 3 (168 Hours)
Operating Temperature: -40°C~125°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 3V~5.5V
Frequency: DC~120kHz
Sensing Current: 6A
16-SOIC (0.295, 7.50mm Width) Package
ACS710KLATR-6BB-T Applications
There are a lot of Allegro MicroSystems
ACS710KLATR-6BB-T Current Sensors applications.
- Inverter and H-bridge current measurements
- Power factor correction
- Overcurrent protection
- DC and AC power monitoring
- Closed-L oop DC- and AC-Current Sensor Modules
- Leakage Current Sensors
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- Frequency, Voltage, and Solar Inverters
- Electrical drives
