A6A259KA Overview
It is package in Tube case.Package 20-DIP (0.300, 7.62mm) contains it.The lighting driver has the mounting type Through Hole.There is a switch type of Latched Driver.It is recommended that the temperature be set to -40°C~125°C TA for reliable performance.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of 4.5V~5.5V.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It has a total of Addressable Latch Mode features.It belongs to the family A6A259.A total of 24 terminations can be found in it.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 1.1A.Using a voltage of 5V allows for high efficiency.Through Hole is mounted in the way.As a result, it has a total of 24 pins.There is 1.7Ohm resistance on the LED driver.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.This part's power supply is 5V.
A6A259KA Features
Supplied from 5V
Resistance of 1.7Ohm
A6A259KA Applications
There are a lot of Allegro MicroSystems A6A259KA Power Switches ICs applications.
- USB Protection
- Portable GPS Device
- Notebook and Tablet Computers
- Portable/Handheld Devices
- Storage Drives
- USB Power Distribution
- Wireless/Networking Cards
- PC Card Hot Swap
- PC Cards
- Storage (HDDs, SSDs)
