ALD4706PBL Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tube case. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 10mV. This electronic part is recommended for mounting type Through Hole. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 120μA . It is recommended to keep the voltage gain at 109.54dB at all times. On this buffer amplifier, there are 4 circuits. There are 4 channels on the operational amplifiers. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. For this linear amplifier to work, the temperature should not be below 0°C. No temperature greater than 70°C should be used. The operating supply voltage of the buffer op amp is rated at 5V. As a result, it is recommended that a power supply of 120μA be used with this electronic part. The dual supply voltage of 6V should be used for the conduct of this electronic component.
ALD4706PBL Features
109.54dB voltage gain
Output Type: Rail-to-Rail
ALD4706PBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4706PBL Instrumentational OP Amps applications.
- Vehicle electronics
- Video data acquisition
- Large motor controllers
- Micro signal measurement
- Broadcasting
- ECG equipment
- Portable electronic products powered by batteries
- Thermocouples
- Signal amplification
- Polarized electrodes
