ALD4702PBL Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. An op amp of this type is a General Purpose-type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. A total of 14 pins are present on the instrumentation amplifier. Op amp ic rates 5mV for input offset voltage. For this electrical component, Through Hole is the recommended mounting type. With regard to operating temperature, op amp ranges 0°C~70°C. A supply current of 4mA can be used to operate this linear amplifier. 107.96dB should remain the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. 4 channels are available on the instrumentation amplifier. Buffer amplifier produces Push-Pull, Rail-to-Rail signals, which is one of its many benefits. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. It is recommended that op amp be used at temperatures below 70°C. The operating supply voltage of the buffer op amp is rated at 5V. This electronic part is recommended to be used with an 4mA supply for best performance. The dual supply voltage of 6V should be used for the conduct of this electronic component.
ALD4702PBL Features
107.96dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
ALD4702PBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4702PBL Instrumentational OP Amps applications.
- Addition operation circuits
- Switching amplifier
- Mobile phone
- Division circuits
- Digital cameras
- Tablets
- Professional videography
- Communication device
- Computer workstations
- Inverse/same-phase proportional circuit
