ALD4701APBL Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 14. It consists of a total of 14 pins in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 14 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. Through Hole is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using a supply current of 480μA , this buffer op amp will be able to operate. 109.54dB should be the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 5V.
ALD4701APBL Features
14 Pins
supply voltage of 2.5V
109.54dB voltage gain
Output Type: Rail-to-Rail
ALD4701APBL Applications
There are a lot of Advanced Linear Devices Inc. ALD4701APBL Instrumentational OP Amps applications.
- High/low-pass filter circuit
- High-frequency data acquisition systems
- Commercial audio systems
- Proportional counter tubes
- Test equipment
- Vehicle electronics
- Biopotential
- Video conversion and routing
- Scintillation detectors
- Active probe
