ALD4302APBL Overview
For convenience, it is packaged in 14-DIP (0.300, 7.62mm) .There is a CMOS, NMOS, Push-Pull, TTL output type for this comparator.Electronic comparator is shipped by Tube .The type of the chip can be classified as General Purpose .Electronic comparator consists of 4 elements in total.The recommended mounting method is Through Hole .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 14 .As a result, this comparator displays a quiescent current of 1mA .This component has a Through Hole mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 1mA when using the device.A supply current exceeding 1mA may result in the comparator malfunctioning.Comparator electronics is not recommended to operate the system at a temperature above 70°C .Comparator electronics cannot be used at a temperature below 0°C .Comparator electronics is specified that the comparator's maximum supply voltage is 6V .A minimum supply voltage of 1.5V is permitted for this comparator.To ensure a high level of output quality, 4 channels work together.
ALD4302APBL Features
CMOS, NMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1mA
ALD4302APBL Applications
There are a lot of Advanced Linear Devices Inc.
ALD4302APBL linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
