Name: ALD4213PCL
Brand: Advanced Linear Devices Inc.
SKU: ALD4213PCL
Price: 8.56000 USD
Availability: InStock

new-10%

ALD4213PCL

Manufacturer part number:ALD4213PCL

Manufacturer:Advanced Linear Devices Inc.

Description:130ns, 130ns SPST - NO/NC 135Ohm Analog Switches 100pA 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:ALD4213PCL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Supplier Device Package	16-PDIP
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2016
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	135Ohm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Max Power Dissipation	600mW
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	3V
Nominal Supply Current	10nA
Max Supply Current	1μA
Turn On Delay Time	300 ns
Voltage - Supply, Single/Dual (±)	3V~12V ±1.5V~6V
Turn-Off Delay Time	1.5 μs
Max Dual Supply Voltage	6V
On-State Resistance (Max)	135Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	3pF 3pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	130ns, 130ns
Charge Injection	0.2pC
Channel-to-Channel Matching (ΔRon)	2.7Ohm
Crosstalk	-90dB @ 100kHz
RoHS Status	ROHS3 Compliant

ALD4213PCL Product Details

ALD4213PCL Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. A SPST - NO/NC switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. There is 135Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. A voltage higher than 12V should not normally be supplied to the switches. 3V should be the lowest voltage fed to the electronic component. The analogue multiplexer may be damaged if voltage is greater than 1μA. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. Temperatures above 85°C should not be used to operate the switches. Suppliers offer a 16-PDIP package.