ALD2724EPBL Overview
There is a 14-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. The op amp ic has an array of 14 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 25μV. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. An 5mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 87.96dB. In total, there are 2 circuits on this buffer amplifier. Op amp ic has 2 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than 0°C degrees Celsius in order to function properly. Use op amp only at temperatures no higher than 70°C. The operating supply voltage of the buffer op amp is rated at 5V. For optimal performance, this electrical part should be connected to a supply with a current of 5mA. There should be a dual supply voltage of 5.25V for you to conduct this electrical part. EPAD? corresponds to the op amp's series.
ALD2724EPBL Features
87.96dB voltage gain
Output Type: Rail-to-Rail
ALD2724EPBL Applications
There are a lot of Advanced Linear Devices Inc. ALD2724EPBL Instrumentational OP Amps applications.
- Information processing
- Industrial applications including automation
- Radar
- Instrumentation
- Division circuits
- Signal transformation
- Ultrasound transducers
- High/low-pass filter circuit
- Thermocouples
- Test and measurement instruments
